The holes that mount to the motor for the Replacement Brushed Chrome Brackets for AirrForce RV Ceiling Fan with Light # 277-000399 do measure 1-1/2" on center just like what you have. I have attached a photo that has additional measurements that you can reference as well. view full answer...
If you turn the wheels by hand do you notice one wheel dragging more than the other? If so that would indicate additional friction which would create more heat. I imagine you'll find this to be the case. If the brake adjustments are the same and are good the other thing to check would be that the castle nut isn't too tight on the hotter wheel.
Also make sure the grease seal is intact on the hotter hub and that the grease didn't leak out. view full answer...
Yes you can use the replacement follow leg # LG-177201 to replace the leg you have. Venture, Stromberg, Lippert, and LCI basically all make the exact same jack legs. view full answer...
The MORryde Shock Absorbing Suspension Equalizers item # MR27ZR are designed for Tandem axle trailers with 8,000 lbs axles and 35" axle spacing, so as long as your trailer meets these requirements. These equalizers would be a great option due to the rubber inserts that dampen road shock and offer up to 3" of suspension travel.
I have linked a diagram below that will show you the dimensions of this equalizer so you can compare them to the ones currently on your trailer. The item # MR27ZR... view full answer...
The Global Link RV Baggage Door Slam Latch - Black - 1-3/4" Thick # 295-000078 replaces the standard baggage door locks and will work with your Montana.
It is 5 inches wide and 4-1/2 inches tall and 1-3/4 inches deep. It does not come with the key you will need to order that as well, you can find it hereKey for Global Link RV Standard Baggage Door Locks - 391 - Qty 1 # 295-000079
If you are adding slam latches and need the entire kit I highly recommend the Lippert Standard Baggage Door... view full answer...
Yes, the Lippert HD 6500-lbTuson 5th Wheel RV Landing Gear Motor # LC196308 will work as an upgrade replacement with more capacity for your Venture landing gear.
This motor works with landing gear systems branded as Lippert, Venture, Stromberg, or LCI. view full answer...
The correct replacement brake shoes for a 2013 Keystone Montana Mountaineer with Dexter 7,000 lb Nev-R-Adjust Braking Assemblies is going to be the Replacement Shoe and Lining for Nev-R-Adjust 12" x 2" Electric part # K71-675 for the left hand side or part # K71-676 for the right hand side. That said, we also offer the Dexter Nev-R-Adjust Electric Trailer Brake Kit part # 23-464-465 which will save you some work.
If you need new hubs/drums, the Dexter Trailer Hub and Drum Assembly part... view full answer...
The correct replacement follow landing gear leg for a Keystone Montana Mountaineer 5th Wheel is the Replacement Follow Leg for Keystone Montana 5th Wheel Landing Gear part # LC178652. If you take a look at the photos on the part for this part you will be able to see what all it replaces. The only other replacements parts we offer are the internal bevel gears.
If you can send me photos of the damage I could better describe what is needed to fix the issue. view full answer...
Since you said the dimensions of your fan blades match the bracket dimensions in the picture I attached yes the # 277-000398 that you referenced would fit and work well as a replacement. They will bolt right up and work just fine. The blades would be right at an 1 inch longer than what you have but that won't make a difference in them fitting well. view full answer...
To replace the Equa-Flex Equalizers on your 2010 Montana Mountaineer you are going to want the MORryde Rubber Equalizers for Tandem Axle Trailers item # MR87ZR. These have nearly identical dimensions and will work great as both a replacement and an upgrade.
The MORryde is 6-1/2" on center from the front shackle bolt to the center of the rear shackle bolt. The height is 3-1/8" from the equalizer mounting bolt to the center line of the shackle bolts. I have linked a diagram with the dimensions... view full answer...
It sounds like there may be an issue with your receiver. Typically when you press an hold the button the receiver it should remain constant after 5 seconds. If you can provide me with the receiver and transmitter numbers I can verify the correct process for connecting them on your 2012 Keystone Montana Mountaineer. view full answer...
We don't have specific information on what parts came on specific models of trailers, but it looks like the smallest possible axles that came on the Keystone Montana Mountaineer regardless of the model number would probably be a 5000-lbs axle. This means that you've likely got 12" brakes on the coach, so if that is the case I recommend using the etrailer Electric Brake Assemblies- 12" x 2" # AKEBRK-6. These are manual adjusting brakes, so you'll also need a brake adjustment spoon # W80630... view full answer...
The # MR78ZR kit is designed for the older RE suspension and won't work with your setup. You have the LRE4000 if you have the #20 shear springs. You will still need to replace the rubber shear spring with the # MR79UR. Then you can use upgrade kit # MR79ZR which is designed for the LRE4000. view full answer...
I do have a way to help you figure out what you need, but we unfortunately don't have a database with those exact parts so we will have to go the old fashioned way of taking some measurements.
From what I could find I believe that you have tandem 7,000 lb axles with double-eye leaf springs. If you can verify this as well as what your leaf springs measure from the center-eye to center-eye that will help us to identify that part of your suspension.
When it comes to the hangers you're... view full answer...
I'm assuming you're looking for an extra camera for the Rear View Safety Backup Camera System # RVS-770613-213. You can add an additional camera with the # RVS-771. view full answer...
The Go Power Solar AE-6, # 342-75011 has 6 panels (190 watts each) that can put out up to 10.1 amps or more for each panel, and there is an expansion kit available. You can add one, or a couple, of the 190 Watt Go Power Overlander Expansion Kits, # 34282182 and not have to change anything with the controllers.
You can also use the Go Power Overlander Expansion Kits, # 34282182 with the Go Power Solar AE-4, # 342-75010. view full answer...
In order to flat-tow a 2020 Jeep Cherokee Trailhawk you'll need a base plate kit, tow bar, safety cables, wiring harness, a supplemental braking system, and possibly a few other things. I will list my recommendations for each of these below.
etrailer Invisible Base Plate Kit part # e98951
etrailer SD Non-Binding Tow Bar part # e34ZR
Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles part # RM-152-98146-7
Blue Ox Patriot Portable Braking System part # BLU37TR
The Mopar Flat-Tow... view full answer...
The Camco Power Grip 90-Degree Locking Electrical Adapter # CAM55582 is exactly what you're looking for. This has a 50 amp female plug with the twist lock and a 30 amp male on the other end. view full answer...